Monthly Archives: March 2020

VADs are increasingly used to mitigate the shortfall in donor organs for cardiopathic patients awaiting heart transplants annually by providing a bridge-to-transplant, or to stabilize patients with congestive heart failure. While rotary VADs have smaller dimensions and simpler structures than pulsatile VADs, their continuous, high-speed, rotating blood-flow patterns represent a potential risk factor to patients […]

EnginSoft has been collaborating with the European Space Agency (ESA) for the past ten years, working actively in the MELiSSA program. At present, this project’s main efforts concern the life support system sector and the idea of creating an artificially closed ecosystem that generates food and oxygen for space crews on longterm missions. The current […]

A satisfied employee can work in a concentrated, motivated and productive manner. A well-designed workplace that meets ergonomic requirements allows for comfortable and painless work. By optimizing workplace performance, reserves can be activated and productivity can be increased in the long run. Read the full case study here: https://enginsoftusa.com/pdfs/Ergonomic-Simulations-Vivelab-Ergo-case-study.pdf

CAE is highly effective for product optimization. In this technical article, we describe how a hybrid method of computational fluid dynamics analysis was used to enhance the design of a medical device to improve its ability to maintain a stable microclimate around a patient, but also to reduce both the computational efforts and the time […]

Chain models are among the largest and most complex that can be simulated with multi-body technology. First, depending on the chain length, the number of moving bodies could become remarkable. Second, contacts disturb the solution all over the chain, causing continuous impulsive excitation of the mechanism. Third, chain links are bodies with reduced inertia, whose […]

Dana Incorporated is a valued automotive powertrain supplier because of the capabilities and value of their products. The Advanced Methods group at the Dana Technical Center looked for innovative technology that can be used in the engineering and design process for their products. In 2015, they evaluated the ability of Particleworks to predict the accumulation […]

There are various piping systems that convey many different fluids on board a vessel. Each fluid must reach its user at the right pressure and flow conditions. Accessories such as valves, bends, fittings and pipes induce pressure losses (as a result of factors such as pressure (p), flow rate (q) and pipe size (diameter, A)). […]

Starting from April 2018, the LincoSim web application was opened to three groups of industrial partners involved in the LINCOLN project and it has been massively used to support the design process of innovative vessels by means of automatic CFD runs. The preliminary statistical results in terms of usability and robustness are really encouraging. Hundreds […]

Introduction of Particlesworks into Univance Corporation Oil has various important roles in lubrication, cooling, buffering and air tightness, whereas it causes torque loss for its flow resistance. For that reason, enough considerations and arguments are necessary for deciding conditions of oil physical property and quantity, and shape optimization. Therefore there was a requirement in Univance […]

Many Army vehicles require tracks in order to meet the tough mobility requirements for the Army mission profile. Modeling and Simulation (M&S) provides a large cost-savings and offers a quick turnaround when addressing vehicle performance issues. Once a baseline model is built for a given system, the model can be changed quickly to address different […]